High-Resolution Registration Mark Sensor
Product subject to change without notice.
SUPPLY VOLTAGE: 10 to 30 VDC. Polarity Protected.
CURRENT REQUIREMENTS: 45 milliamps (exclusive of load).
OUTPUT TRANSISTORS: (1) NPN and (1) PNP sensor output transistor. Outputs can sink or source up to 150 milliamps (current limit). Short circuit protected; protected from pulsing at power up.
RESPONSE TIME: • MEP45WL - Light/Dark = 45 µs Repeatability = 13 µs • MEP - Light/Dark = 175 µs
LED LIGHT SOURCE: White = broadband color spectrum.
LIGHT IMMUNITY: Responds to sensor's pulse modulated light source ... immune to most ambient light and strobes, including indirect sunlight.
PUSH BUTTON CONTROL: " One-Touch" AUTOSET Pushbutton setup. Tweak adjustments with "up" or "down" buttons. Set status of 5 options; 5 - Lock 4 - Output Invert Selectable Pulse Stretchers of: 10 ms 25 ms 50 ms
HYSTERESIS: Set for high resolution ... less than one bar on the Contrast Indicator.
DIAGNOSTIC INDICATORS: 5 LED Bar graph functions in one of two modes: 1. Contrast Indicator ... Displays scaled reading of sensor's response to contrasting light levels (light to dark). 2. Status Indicator ... displays status of 5 selectable options. Red LED output indicator ... Illuminates when the sensor's output transistors are "ON". Note; If Output LED flashes, a short circuit condition exist. Amber LED ... Illuminates when in the options select mode. Yellow LED ... Illuminates when the lock feature is activated.
AMBIENT TEMPERATURE: -40ºC to 70ºC (-40ºF to 158ºF).
RUGGED CONSTRUCTION: Chemical resistant high impact polycarbonate housing. Industry Ratings: NEMA 4X, 6P, and IP67
DIMENSIONS: Width: 3.00 in (76.2mm), Height: 3.50 in (88.9mm), Depth: .75 in (19.1mm).