Product Home Drawings

MINI-EYE™

The Miniature Sensor

Product subject to change without notice.

SUPPLY VOLTAGE
  • 10 to 30 VDC
  • Polarity Protected
CURRENT REQUIREMENTS
  • 30mA (exclusive of load)
OUTPUT TRANSISTORS (CURRENT LIMITED)
  • NPN: Sink up to 100mA
  • PNP: Source up to 100mA
  • All outputs are continuously short circuit protected
RESPONSE TIME
  • Light State response = 600µs (1,100µs, Thru-Beam)
  • Dark State response = 600µs (1,100µs, Thru-Beam)
LED LIGHT SOURCE
  • Red = 633 nm
  • Infrared = 850 nm
  • Pulse Modulated
EXCESS GAIN ADJUSTMENT
  • Sensitivity controlled by a screwdriver adjustment to prevent tampering
 LIGHT/DARK “ON” OPERATION
  • Light “ON” achieved by connecting white wire to negative lead
  • Dark “ON” achieved by connecting white wire to positive lead
RANGE
  • Dependent on model, see Catalog
HYSTERESIS
  • Approximately 20% of signal
LIGHT IMMUNITY
  • Responds to sensor’s pulse-modulated light source, resulting in high immunity to most ambient light, including high intensity strobes
DIAGNOSTIC INDICATORS
  • Red LED = Output Status
  • Green LED = Power “ON”
AMBIENT TEMPERATURE
  • -40° to 70°C (-40° to 158°F)
RUGGED CONSTRUCTION
  • Chemical resistant, high-impact polycarbonate housing
  • Waterproof ratings: NEMA 4X, IP66