Multi-Mate^®

SUPPLY VOLTAGE:
120 or 240 VAC
50/60 Hz

DC Power Output:
24 VDC nominal @ 150mA (unregulated)

OUTPUT TRANSISTORS (Pin 12):
NPN grounded emitter open collector output transistor
rated at 100mA maximum. Maximum voltage = 40 VDC

Output Relay:
Models PM-8100/PM-8200 - Solid state AC relay/Triac
rated up to 1/6 HP motor load.
Models PM-8125/PM-8225 - Epuipped with larger heat sink rated up to 1/4 HP motor load

Input (Pin 7):
Opto-isolated for high noise immunity. Accepts input from NPN open collector transistor or switch to ground.
Responds to input durations as short as 100 microseconds.

Reset/Disable (Pin 10 or 11):
Accepts input from NPN open collector transistor or switch to ground (Pin 9). Activated when Pin 9 is shorted to Pin 10 or 11.

DIMENSIONS:
Width: 3.5in (88.9mm), Height: 4.75in (120.7mm), Depth: 2.25in (57.15mm)
 

Basic Mode Selection: (Most Common)

Single Event Models - PM-8100/8125

• Motion (Retriggable One-Shot)
• On-Delay
• Off Delay
• One-Shot
• Latch

Dual Even Models - PM-8200/8225

• On-Delay then Off Delay
• On-Delay then One-Shot
• On-Delay then Latch
• Off-Delay then One-Shot
• Off-Delay then Latch
• One-Shot Input and One-Shot
• One-Shot (Delay) then One-Shot
• One-Shot (Delay) then Latch
• Motion then One-Shot
• Motion then Latch
• Latching Input then On-Delay
• Latching Input then One-Shot