Din-Rail Mountable Sensor
Product subject to change without notice.
SUPPLY VOLTAGE: 12 to 24 VDC Polarity Protected
CURRENT REQUIREMENTS: 60 milliamps (exclusive of load)
OUTPUT TRANSISTORS: (1) NPN and (1) PNP sensor output transistors (1) PNP Action Alert output transistor Outputs sink or source up to 150 milliamps (current limit) Momentary short circuit protected against pulsing at start-up Light/Dark switch determines output status
RESPONSE TIME: Minimum duration of input event = 500 microseconds
LED LIGHT SOURCE: Options: Infrared= 880nm, Red= 660nm, Pulse Modulated
AMBIENT TEMPERATURE: -40ºC to 70ºC (-40ºF to 158ºF)
RUGGED CONSTRUCTION: Chemical resistant high impact polycarbonate housing Waterproof, NEMA 4X, 6P, and IP67 enclosure rating Conforms to heavy industry grade CE requirements
DIMENSIONS: Width: 2.35 in (59.7mm), Height: 1.38 in (35.5mm), Depth: .48 in (12.2mm)
MAXIMUM SENSING RANGE: Retroreflective: up to 20 ft. Proximity: up to 3 ft. Fiberoptic Prozimity: up to 3 in. w/o lens / 6 in. w/lens Fiberoptic Opposed Mode: up to 8 in. w/o lens / 20+ft. w/lens