Clear Object Sensor
Now with 100 microseconds response time!
Product subject to change without notice.
SUPPLY VOLTAGE: 10 to 30 VDC Polarity Protected
CURRENT REQUIREMENTS: 50 milliamps (exclusive of load)
OUTPUT TRANSISTORS: (1) NPN and (1) PNP sensor output transistors Outputs sink or source up to 150 milliamps (current limit) All outputs are continuously short circuit protected Outputs protected from pulsing during power up
RESPONSE TIME: Light state response = 100 microseconds Dark state response = 100 microseconds
LED LIGHT SOURCE: Red= 660 nm Pulse Modulated
PUSH BUTTON CONTROL: "One-Touch" AutoSet™ push-button setup Tweak adjustments with "UP" or "Down" buttons LST™ (Light State Tracking) Enable/Disable selection Light/Dark "ON" selection
DIAGNOSTIC INDICATORS: 8 LED Contrast Indicator displays scaled reading of sensor's response to contrasting light levels (light to dark) Red LED "LOCK" Indicator Green LED "LST™" (Light State Tracking) Indicator Red Output Status Indicator
MAXIMUM SENSING RANGE: From 6 in. to 8 ft. (15.24 cm to 2.4 m) Distance to AR6151 reflector
REMOTE AUTOSET INPUT: Opto isolated sinking input (10 milliamps)
Hysteresis: 2 bars on the Contrast Indicator Light State switch = 5 Dark State switch = 3
LIGHT IMMUNITY: Responds to sensor's pulse-modulated light source, resulting in high immunity to most ambient light, including high intensity strobes.
AMBIENT TEMPERATURE: -40ºC to 70ºC (-40ºF to 158ºF)
RUGGED CONSTRUCTION: Chemical resistant high impact polycarbonate housing Waterproof, ratings: NEMA 4 and IP67 enclosure rating Conforms to heavy industry grade CE requirements
DIMENSIONS: Width: 2.205 in (56.0mm) Height: 2.555 in (64.9mm) Depth: 0.90 in (22.9mm)