SUPPLY VOLTAGE
- 10 to 24 VDC
- Polarity Protected
CURRENT REQUIREMENTS
- 50 mA (exclusive of load)
OUTPUT TRANSISTORS
- (1) NPN and (1) PNP sensor output transistor
- Sensor’s output can sink or source up to 150 mA (current limited)
- Outputs are continuously short-circuit protected
RESPONSE TIME
- Light State response = 500 microseconds
- Dark State response = 500 microseconds
LED LIGHT SOURCE
- Red = 660 NM
- Infrared = 880 NM
- Pulse Modulated
PUSH BUTTON CONTROL
- AUTOSET™ Routine: Push and release with sensor in “light” state
- Excess Gain Adjustment: Tap twice to step to higher excess gain
- Push and hold to activate Flash Rate Alignment Indicator
- Light /Dark “ON” selection: Tap 5 times to toggle
|
RANGE
- Dependent on optical block (see range guidelines)
HYSTERESIS
- Approximately 15% of signal
LIGHT IMMUNITY
- Responds to sensor’s pulse-modulated light source, resulting in high immunity to most ambient light, including high intensity strobes.
DIAGNOSTIC INDICATORS
- Dual Red/Green LED:
Red = Output Status
Green = Flash Rate Alignment Indicator
- Dual Green/Amber LED:
Green = “ON” After AUTOSET™ Routine
Amber = “ON” After Excess Gain Adjustment
AMBIENT TEMPERATURE
- -40° to 70°C (-40° to 158° F)
RUGGED CONSTRUCTION
- Chemical resistant, high impact polycarbonate housing
- Waterproof ratings: NEMA 4, IP67
- Conforms to heavy industry grade CE requirements
Product subject to change without notice.
|