|
SUPPLY VOLTAGE:
120 or 240 VAC
50/60 Hz
DC Power Output:
24 VDC nominal @ 150mA (unregulated)
OUTPUT TRANSISTORS (Pin
12):
NPN grounded emitter open collector output transistor
rated at 100mA maximum. Maximum voltage = 40 VDC
Output Relay:
Models PM-8100/PM-8200 - Solid state AC relay/Triac
rated up to 1/6 HP motor load.
Models PM-8125/PM-8225 - Epuipped with larger heat sink rated up to 1/4 HP motor
load
Input (Pin 7):
Opto-isolated for high noise immunity. Accepts input from NPN open collector transistor
or switch to ground.
Responds to input durations as short as 100 microseconds.
Reset/Disable (Pin 10 or 11):
Accepts input from NPN open collector transistor or switch to ground (Pin 9). Activated
when Pin 9 is shorted to Pin 10 or 11.
DIMENSIONS:
Width: 3.5in (88.9mm), Height: 4.75in (120.7mm), Depth: 2.25in (57.15mm)
|
Basic Mode Selection: (Most Common)
Single Event Models - PM-8100/8125
- Motion
(Retriggable One-Shot)
- On-Delay
- Off
Delay
- One-Shot
- Latch
Dual Even Models - PM-8200/8225
- On-Delay
then Off Delay
- On-Delay
then One-Shot
- On-Delay
then Latch
- Off-Delay
then One-Shot
- Off-Delay
then Latch
- One-Shot
Input and One-Shot
- One-Shot
(Delay) then One-Shot
- One-Shot
(Delay) then Latch
- Motion
then One-Shot
- Motion
then Latch
- Latching
Input then On-Delay
- Latching
Input then One-Shot
|