For documentation and other FS Fork Sensor models, please see our FS Fork Sensor Marketing Page.
Technical Features
Model Specific |
LED LIGHT SOURCE: • LED, Red = 660nm
MINIMUM SIZE OBJECT DETECTION*: • 0.030in (0.75mm) at maximum margin (fully clockwise) • 0.012in (0.30mm) at minimum allowed margin
GAP RANGE: • 3.937in (100mm)
|
OUTPUT: • 150mA output current • Short circuit & transient spike protected • Saturation voltage: < 0.3 Vdc @ 10mA < 2 Vdc @ 150 mA • PNP
CONNECTIONS: • M8, 3-pin
|
Family Specific |
SUPPLY VOLTAGE & CURRENT: • 8-30 Vdc • Current 45mA • Reverse polarity protected • Transient spike protected
POWER-UP DELAY: • 300ms. No output pulse on power-up.
RESPONSE TIME: • 240µs (120µs repeatability)
ADJUSTMENTS: • Sensitivity • Light/Dark output select
LIGHT IMMUNITY: • High immunity to most ambient light, including high efficiency lighting and high intensity strobes.
|
LED INDICATORS: • Red output LED. Illuminates when output is ON. Blinks to indicate low signal margin.
OPERATING TEMPERATURE: • -20°C to 70°C (-4°F to 158°F)
HOUSING CONSTRUCTION: • 10mm wide anodized aluminum housing • Chemical resistant, high-impact ABS & PC Human interface • RX Lens: acrylic • Epoxy encapsulated
RATINGS & CERTIFICATIONS: • IP67 • CE • UL pending
|
Literature |
Catalog Pages Instructions
|
EN
EN
|
|