Simply fill out the form below, and continue Download!

LABEL-EYE

High Speed Label Eye

The High-Speed LABEL•EYE® is a special purpose slot sensor optimized to sense adhesive labels adhering to a roll of backing paper and detect them to within .004" of position at web speeds of 2000 feet per minute. The web of labels is directed from a “roll” across a peeler plate or around a sharp edge. As the web passes around the sharp edge of the peeler plate, the adhesive label peels from the backing material. The function of the sensor is to look through the backing paper to detect the "gap" between the labels and signal the labeling machine to stop the dispensing mechanism before the label is completely dislodged from the backing material. With the next "up" label protruding off the end of the peeler plate, it is now perfectly positioned to be applied to the next product as it passes by on a conveyor.

HIGH SPEED
10us speed of responce for increased position accuracy.

PUSH BUTTON SETUP
Setup is acompleshed by the single push of a button. Elininates the need for screw drivers to adjust the sensor. Place the label gap in position and press the "Normal" button for opaque labels or press the "Translucent" for translucent labels.

STATUS INDICATORS
Displays status of output, shorted output, AUTOSET, and AUTOSET Status.

REMOTE AUTOSET
Remotely adjust the sensor from a push button momentary switch or a touch screen to PLC instantaneously.

Features

 
Details

Features and Options:

  • 10 microseconds Response Time
  • 5 microseconds Repeatability
  • One Button AUTOSET
  • Tweak-able Up/Down Adjustment
  • M12, M8, or Cable Models
  • Robust Electrical and Mechanical Design
  • Remote AUTOSET on M12 Models

 

Benefits:

  • Easy to Set Up
  • Highly Accurate and Precise
  • Low Maintenance
  • Affordable, Low-Cost Option
  • Made in USA
  • Durable and Reliable

SUPPLY VOLTAGE:
10 to 30 VDC
Polarity Protected

CURRENT REQUIREMENTS:
45 milliamps (exclusive of load)

OUTPUT TRANSISTORS:
(1) NPN and (1) PNP sensor output transistors
Outputs sink or source up to 150 milliamps (current limit)
All outputs are continuously short circuit protected

RESPONSE TIME:
10 microseconds response time
5 microseconds repeatability

LED LIGHT SOURCE:
High Intensity red LED
Pulse Modulated

AMBIENT TEMPERATURE:
-40ºC to 70ºC (-40ºF to 158ºF)

PUSH BUTTON CONTROL:
AUTOSET - One-push button setup
LT/DK - Push and Hold to change output Light On/Dark On
UP/DWN - Tweak-able Up/Down adjustment

LIGHT IMMUNITY
Responds to sensor's pulsed modulated light source, resulting in high immunity to most ambient light

INDICATORS
Green LED flashes when AUTOSET routine is activated and stays illuminated when AUTOSET is completed
Red LED illuminates when sensor's output transistors are "ON".

RUGGED CONSTRUCTION:
Chemical resistant to harsh cleaners such as detergents, alcohols, and ketones.
Conforms to heavy industry grade CE requirements

 
Details

Features and Options:

  • 10 microseconds Response Time
  • 5 microseconds Repeatability
  • One Button AUTOSET
  • Tweak-able Up/Down Adjustment
  • M12, M8, or Cable Models
  • Robust Electrical and Mechanical Design
  • Remote AUTOSET on M12 Models
  • Waterproof

 

Benefits:

  • Easy to Set Up
  • Highly Accurate and Precise
  • Low Maintenance
  • Affordable, Low-Cost Option
  • Made in USA
  • Durable and Reliable

High Speed Label Eye

 
Details

Features and Options:

  • 10 microseconds Response Time
  • 5 microseconds Repeatability
  • One Button AUTOSET
  • Tweak-able Up/Down Adjustment
  • M12, M8, or Cable Models
  • Robust Electrical and Mechanical Design
  • Remote AUTOSET on M12 Models
  • Waterproof

 

Benefits:

  • Easy to Set Up
  • Highly Accurate and Precise
  • Low Maintenance
  • Affordable, Low-Cost Option
  • Made in USA
  • Durable and Reliable

1. Select Sensor Model required:

  • LERC10 - Red LED, 4-pin M8 Connector
  • LERR10 - Red LED, 5 Conductor, 6ft. (1.8m) Cable
  • LERRC10-M12 - Red LED, 5-pin M12 Connector

 
Details

Features and Options:

  • 10 microseconds Response Time
  • 5 microseconds Repeatability
  • One Button AUTOSET
  • Tweak-able Up/Down Adjustment
  • M12, M8, or Cable Models
  • Robust Electrical and Mechanical Design
  • Remote AUTOSET on M12 Models
  • Waterproof

 

Benefits:

  • Easy to Set Up
  • Highly Accurate and Precise
  • Low Maintenance
  • Affordable, Low-Cost Option
  • Made in USA
  • Durable and Reliable

LIGHT SOURCE SELECTION

Red (Visible) Light Source
Visible red LED light source recommended for sensing transparent/translucent objects. Outperforms infrared light in many moderate to low contrast applications. Also recommended for use with plastic fiberoptic light guides.

 
Details

Features and Options:

  • 10 microseconds Response Time
  • 5 microseconds Repeatability
  • One Button AUTOSET
  • Tweak-able Up/Down Adjustment
  • M12, M8, or Cable Models
  • Robust Electrical and Mechanical Design
  • Remote AUTOSET on M12 Models
  • Waterproof

 

Benefits:

  • Easy to Set Up
  • Highly Accurate and Precise
  • Low Maintenance
  • Affordable, Low-Cost Option
  • Made in USA
  • Durable and Reliable

Product Literature

Catalog Pages
Instructions

View FileEN
View FileEN

Applications:

Label Rewinding
Label Rewinding

Videos:

Marketing


Pack Expo 2012

 

 
Details

Features and Options:

  • 10 microseconds Response Time
  • 5 microseconds Repeatability
  • One Button AUTOSET
  • Tweak-able Up/Down Adjustment
  • M12, M8, or Cable Models
  • Robust Electrical and Mechanical Design
  • Remote AUTOSET on M12 Models
  • Waterproof

 

Benefits:

  • Easy to Set Up
  • Highly Accurate and Precise
  • Low Maintenance
  • Affordable, Low-Cost Option
  • Made in USA
  • Durable and Reliable