ACT AUTOMATIC CONTRAST TRACKING
ACT automatically adjusts the sensor as conditions change. This can include dirty or damaged lenses or reflectors, damaged fiberoptics, LED light source or thermal drift, and target variations such as position, orientation, or color. It can also compensate for signal shift or deterioration caused by highspeed input events. The SMARTEYE® PRO continues to operate requiring far less maintenance than other sensors, making it the choice in tough sensing applications.
AGS AUTOMATIC GAIN SELECT
This unique feature provides automatic digital selection of the amplifier gain based upon your application requirements.
This two-step procedure is easy to perform and requires no expertise whatsoever.
- Establish one of the following conditions: Proximity Mode – Reflect light off object. Beam Break – Remove object from light beam path.
- Depress the red and green button simultaneously for three seconds.
The AUTOSET adjustment routine only requires one finger to push one button one time. Even in a dynamic operating condition, with ongoing input events, all you have to do is push a button for a perfect setting.
10ms pulse stretcher/off delay.
EDR® (Pat. No. 5,621,205)
Another unique feature, the EDR®(Enhanced Dynamic Range) circuit is digitally controlled. It prevents dark state saturation and expands the operating range without reducing amplifier gain.
ACTION ALERT INDICATOR LED
This indicator provides an early warning to prevent marginal performance, when the sensor can no longer provide full contrast deviation as displayed on the Contrast Indicator.
5-LED DUAL FUNCTION INDICATOR
Provides “at-a-glance” performance data during both setup and operation.
Displays status of five selectable functions: Lock, AUTOSET, and Light/Dark, Auto Trac and Timer.
Choice of ten “quick change” optical blocks allows use in the proximity, convergent, retroreflective, polarized retroreflective, fiberoptic, or gap sensing modes.
LED LIGHT SOURCES
Choice of four LED light sources – invisible infrared, red, blue, and white light.
Built-in connector for use with quick disconnect cable or shielded 6' (1.80m) cable.